Steinutstyr

8’ Dump Height With Super Large 3cubic Yard Hopper
Spend More Time Picking Less Time Running to the Dump Site

Load trucks with ease!
Build larger stone piles!
Durable tapered T-iron grate with 1-1/2” (38mm) thick teeth eliminates jamming while allowing soil to sift through for clean rock picking.
Batt tubing has 3/8” thick walls with wrap around, hard surfaced batt teeth for greater strength and wear resistance.
Large, heavy wire springs hold batts firmly in position and cushion shock loads. Spring coil diameter is reduced at the ends to minimize the possibility of breaking the spring hooks.
Floating grate protects the machine from damage due to large immovable rocks.
Optional hydraulic pivoting hitch pole allows the machine to be quickly moved from the offset picking position to a centered transport position.
Large 16.5L X 16.1 10 ply tires provide superior flotation.

3.2 cu Yard Hopper
Superior Rock Picking Performance

The RS320 features an extra large 3.2 cubic yard (2.43 m3) hopper for greatly increased rock removal efficiency. The RS320's hopper has twice the capacity of an average rock picker hopper.
The RS320's new T-iron tapered grate with 3/4” bottom and 1/2” top material virtually eliminates all small rock jamming.
Ideal for today’s zero till market. The 48” grate will pick at least 50% less dirt, & trash than most conventional reel type models.
Large, flotation type, all weather 16.5 x 16.1 tires are mounted on high capacity eight bolt wheels and hubs.
The RS320 Rock Picker removes surface rock from 2 to 28 inches (50 to 700 mm) diameter.

Roto-Tilling Action
Breaks up Lumps & Levels The Ground

Transports at an ultra narrow width of 93” (2.36 M).
Windrows 2” to 25” rocks with ease, forming them into neat uniform rows.
Power is supplied to the windrower drum via a heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads.
The final drive chain is totally enclosed for longer service life.
The windrower drum is 14 feet (4.27 M) wide and is constructed of 8 5/8 inch (219mm) heavy wall HSS tube.
Hard surfaced, 5/8 inch (15.9mm) x 6 inch thick(152.4mm) long teeth are welded directly to the drum pipe, resulting in problem-free operation even in difficult conditions.

Multi-Purpose
3-Point Hitch Windrower
Breaks up Lumps, Levels the Ground

Variable hydraulic drum angle from 0° to 18.°
Windrows 2” to 25” rocks with ease, forming them into neat uniform rows.
Power is supplied to the windrower drum, via heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads.
The final drive chain is totally enclosed for longer service life.
The windrower drum is contructed of 8 5/8” (219mm) heavy wall tube.
Hard surfaced 5/8” thick (15.9mm) x 6” (152.4mm) long teeth are welded directly to the drum, resulting in problem-free operation.

Arvid Gimre AS